(Info) Special Class Railway Apprentices Exam (UPSC)
Special Class Railway Apprentices Exam (UPSC)
Direct Recruitment to the Special Class Railway Apprentices' is made through the Union Public Service Commission (UPSC) on the basis of the Annual Competitive Examinations. Recruitment to the Indian Railway Traffic Service (IRTS) and the Indian Railway Accounts Service (IRAS) is done on the basis of the result of the Civil Services Examination (The Indian Administrative service examination) and that to the Indian Railway services of Engineers (IRSE), Indian Railway Service of Electrical Engineers (IRSEE) and Indian Railway Services Stores (IRSS) is made on the basis of the Combined Engineering Service Examination.
Recruitment of Clerks, Assistant Station masters, Ticket Collectors, train Collectors and other vacancies is also done through direct recruitment by the Railway Recruitment Boards in different states. Depending upon the vacancies that arise, these boards call out for exams for different posts. These Boards are located at 19 centres in Allahabad (www.rrbald.nic.in), Ahmedabad, Ajmer( www.rrbajmer.org), Chandigarh, Jammu, Gorakhpur, Patna (www.rrbpatna.org) , Guwahati, Calcutta, Bhubaneswar( www.rrbbbs.org), Chennai (www.rrbchennai.net), Trivandrum, Bangalore, Secunderabad (www.rrbsc.org), Mumbai, Bhopal , Malda, Ranchi etc. The Boards advertise the vacancies through newspapers and the Employment News and conduct both written examinations and interviews. Recruitment is made in the lowest grades to these categories and prescribed qualification is generally matriculation. For some posts like Commercial Apprentice, Traffic Apprentice, Asstt. Station Master, Clerk Grade I, guards etc., prescribed qualification is a degree from a recognised University.
For Recruitment to the Indian Railway Service Mechanical Department, there is a dual method, one is by Combined Engineering Service Examination and the other is UPSC Special Class Railway Apprentices' Examination. Approximately, 50 percent are recruited as the Special Class Railway Apprentices through the U.P.S.C. Exam. This examination is held once a year, generally in the month of July. Blank application forms and other particulars are published in Employment News, generally in the month of February.
Eligibility
A candidate must be either a citizen of India, or a subject of Nepal, or a subject of Bhutan, or a Tibetan refugee who came over to India before 1st January, 1962 with the intention of permanently settling in India. or a person of Indian origin who has migrated from Pakistan, Burma, Sri Lanka, East African countries of Kenya, Uganda, the United Republic of Tanzania, Zambia, Malawi, Zaire, Ethiopia or from Vietnam with the intention of permanently settling in India.
Educational qualification 

For admission to the examination a candidate must have passed in the first or second division, the Intermediate or an equivalent Examination of a University or Board approved by the Government of India with Mathematics and at least one of the subjects Physics and Chemistry as subjects of the examination. Graduates with Mathematics and at least one of the subjects Physics and Chemistry as their degree subjects may also apply,

Must have passed in the first or second division, the Higher Secondary (12 years) Examination under 10 plus 2 pattern of School Education with Mathematics and atleast one of the subjects Physics and Chemistry as subjects of the examination,

Must have passed the first year Examination under the three year degree course of a university or the first examination of the three year diploma course in Rural Service of the National Council for Rural Higher Education or the third year Examination for promotion to the 4th year of the four year B.A./B.Sc. (Evening College) Course of the Madras University with Mathematics and at least one of the subjects Physics and Chemistry as subjects of the examination provided that before joining the degree/diploma course he passed the Higher Secondary examination or the PreUniversity or equivalent examination in the first or second division.

Candidates who have passed the first/second year examination under the threeyears degree course in the first or second division with Mathematics and either Physics or Chemistry as subjects of the Examination may also apply; provided the first/second year examination is conducted by a University

Must have passed in the first or second division the PreEngineering Examination of a University, approved by the Government of India

Must have passed in the first or second division the PreProfessional/ Pre Technological Examination of any Indian University or a recognised Board, with Mathematics and at least, one of the subjects Physics and Chemistry as subjects of the examination conducted one year after the Higher Secondary or PreUniversity stage;

Must have passed the first year examination under the five year Engineering Degree Course of a University : Provided that before joining the Degree Course, he passed the Higher Secondary Examination or preUniversity or equivalent examination in the first or second division.

Candidates who have passed the first year Examination of the fiveyear Engineering Degree Course in the first or second division may also apply provided the first year Examination is conducted by a University

Must have passed in the first or second division the PreDegree Examination of the Universities of Kerala and Calicut with Mathematics and at least one of the subjects Physics and Chemistry as subjects of the examination.
Age: Minimum 17 years and maximum age should be less than 21 years as on August 1 of the year of examination. Age is relaxable for SC/ST and certain other categories.
Fee: Rs.50/ is payable by the Candidates seeking admission to the examination .Candidates belonging to SC/ST are not required to pay any fee.
Application Procedure
The UPSC have developed an application form
common for all their examinations which will be processed on computerized
machines. This application form along with an Information Brochure containing
general instructions for filling up the form, an acknowledgement card and an
envelope for sending the application is obtainable from the designated Head Post
Offices/Post Offices throughout the country as listed below of Notice against
cash payment of Rs. 20/ (Rupees twenty only). Form should be purchased from the
designated Post Offices only and not from any other agency. This form can be
used only once and for only one examination. Candidates must use the form
supplied with the Information Brochure only and they should in no case use
photocopy/reproduction/unauthorized printed copy of the Form. Since this form is
electronically scanable, due care should be taken to fill up the application
form correctly. The candidates should also fill up in the relevant places of the
Acknowledgement Card, their Application Form Number (8digit) and the name of
the examination. The applicants are required to affix the postage stamp of Rs.
6/ on the Acknowledgement Card and send the same along with application form to
UPSC. If an applicant fails to affix the postage stamp of requisite amount his
acknowledgement card will not be despatched and Commission will not be
responsible for nonreceipt of acknowledgement card by the applicant. The duly
filled in application form and the acknowledgement card should then be mailed in
the special envelope supplied with the Information Brochure. You should also
write the name of examination viz. "Special Class Railway Apprentices'
Examination, (& Year in which examination is held )" on the envelope before
despatching it to
"Secretary, Union Public Service Commission, Dholpur House, New
Delhi110069".
List of Head Post Offices/Post Offices where UPSC application forms are available:
Andhra Pradesh Circle : Hyderabad GPO, Hyderabad Jubilee, Kachiguda Stn., Khairatabad, Secunderabad, Trimulgherry, Adilabad, Anantapur, Arundelpet (Guntur), Chittoor, Cuddapah, Eluru, Kakinada, Karimnagar, Khammam, Kurnool, Machilipatnam, Mahboobnagar, Medak, Nalgonda, Nellore, Nizamabad, Ongole, Srikakulam, Vizianagaram, Vijayawada, Vikarabad, Visakhapatnam, Warangal.
Assam Circle : Guwahati, Barpeta, Dhubri, Dibrugarh, Diphu, Golaghat, Hailakandi, Jorhat, Karimganj, Kokrajhar, Mangaldoi, Nagaon, Nalbari, North Lakhimpur, Sibsagar, Silchar, Tezpur, Tinsukia.
Bihar Circle : Patna, GPO, Bankipur, Arrah, Aurangabad, B. Deoghar, Bokaro Steel City, Banka, Battiah, Begusarai, Bhagalpur, Biharsharif, Buxar, Chaibasa, Chapra, Daltonganj, Darbhanga, Dhanbad, Dumka, Gaya, Giridih, Gopalganj, Gumla, Hajipur, Hazaribagh, Jamshedpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Nawada, Purnea, Ranchi, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan.
Delhi Circle : Delhi GPO, New
Delhi, Indra Prastha, Ramesh Nagar, Sarojini Nagar, Lodi Road, Krishna Nagar,
Ashok Vihar, Parliament Street, UPSC PO.
Gujarat Circle : Gandhinagar, Ahmedabad, Amreli Anand, Bharuch, Bhavnagar, Bhuj,
Dahod, Godhra, Himatnagar, Jamnagar, Junagadh, Kheda, Mehesana, Navrangpura,
Navsari, Palanpur, Patan, Porbandar, Rajkot, Revdi Bazar, Surat, Surendranagar,
Valsad, Vadodara.
Haryana Circle : Ambala GPO, Ambala City, Bahadurgarh, Bhiwani, Faridabad, Gurgaon, Hissar, Jind, Karnal, Kurukshetra, Narnaul, Panipat, Rohtak, Sirsa, Sonepat.
Himachal Pradesh Circle : Shimla, Bilaspur, Chamba, Hamirpur, Kangra, Keylong, Kulu, Mandi, Nahan, Recong, Peo, Solan, Una.
Jammu & Kashmir Circle : Srinagar, Anantnag, Baramulla, Jammu, Kathua, Leh, Rajouri, Udhampur. Karnataka Circle : Bangalore GPO, Bangalore City, Basavangudi, HAL II Stage, Jayanagar, R.T. Nagar, Bagalkot, Raichur, Rajajinagar, Belgaum Bellary, Bidar, Bijapur, Chikmagalur, Chitradurga, Davengere, Dharwad, Gadag, Gulbarga, Hassan, Haveri, Hubli, Karwar, Kolar, Madikere, Mandya, Mangalore, Manipal, Mysore, Nanjagud, Shimoga, Sirsi, Tumkur, Udupi.
Kerala Circle : Trivandrum, Alleppey (Alappuzha), Calicut, Cannanore, Ernakulam, Kalpetta, Kasargod, Kattappana, Kottayam, Malappuram, Palghat, Pathanamthitta, Quilon, Trichur, Kavaratti, (Lakshadweep).
Madhya Pradesh Circle : Bhopal GPO, Bilaspur, Ambikapur, Balaghat, Betul, Bhind, Chhatarpur, Chhindwara, Damoh, Dewas, Dhar, Durg, Guna, Hoshangabad, Indore, Jabalpur, Jagdalpur, Jhabua, Khandwa, Khargone, Lashkar, Mandla, Mandsaur, Morena, Narsinghpur, Neemuch, Raigarh, Raipur, Raisen, Rajgarh (Biora), Rajnandgaon, Ratlam, Rewa, Sagar Cantt., Satna, Sehore, Seoni, Shahdol, Shajapur, Shivpuri, Sidhi, Tikamgarh, Ujjain, Vidisha.
Maharashtra Circle : Mumbai GPO, Andheri, Borivili, Chembur, Chinehbunder, Dadar, Girgaon, Kalbadevi, Mahim, Mandvi, Mumbai Central, Ahmednagar, Akola, Alibag, Amravati, Aurangabad, Beed, Bhandara, Buldhana, Chandrapur, Dhule, Jalagaon, Jalna, Karad, Kolhapur, Latur, Nagpur GPO, Nanded, Nasik, Osmanabad, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sawantwadi, Solapur, Thane, Wardha, Yeotmal, Margaon (Goa), Panaji (Goa).
North East Circle : Agartala, Aizwal, Dharmanagar, Imphal, Itanagar, Kohima, Radhakishorepur, Shillong, Tura.
Orissa Circle : Bhubaneswar GPO, Angul, Bolangir, Balasore, Bargarh, Baripada, Berhamapur, Bhadrak, Bhawanipatna, Cuttack GPO, Dhenkanal, Jagatsinghpur, Jajpur, Jeypore (K), Jharsuguda, Kendrapara, Keonjhargar, Koraput, Nayagarh, Parlakhemundi, Phulbani, Puri, Rayagada, Sambalpur, Sundargarh.
Punjab Circle : Amritsar, Bhatinda, Faridkot, Ferozepur, Gurdaspur, Hoshiarpur, Jalandhar City, Kapurthala, Ludhiana, Moga, Patiala, Ropar, Sangrur, Chandigarh.
Rajasthan Circle : Jaipur GPO, Jawahar Nagar, Shastri Nagar, Ajmer, Alwar, Banswara, Baran, Barmer, Bharatpur, Bhilwara, Bikaner, Bundi, Chittorgarh, Churu, Dausa, Dholpur, Dungarpur, Hanumangarh, Hindaun, Jaisalmer, Jalore, Jhalawar, Jhunjhunu, Jodhpur, Kankroli, Kota, Nagaur, Pali Marwar, Sawaimadhopur, Shastri Circle Udaipur, Sikar, Sirohi, Sriganganagar, Tonk.
Tamil Nadu Circle : Chennai GPO, Anna Road, St. Thomas Mount, T. Nagar, Bodinayakanur, Chengalpattu, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Karur, Madurai, Nagapattinam, Nagercoil, Namakkal, Pudukottai, Ramanathapuram, Salem, Sivagangai, Tambaram, Thanjavur, Thiruvannamalai, Tiruchirapalli, Tirunelveli, Tiruvallur, Tiruvayur, Turaiyur, Tuticorin, Udhagamandalam, Vellore, Villupuram, Virudhunagar, Pondicherry.
Uttar Pradesh Circle : Lucknow, Lucknow Chowk, Agra, Akbarpur, Aligarh, Allahabad, Allahabad Katchery, Almora, Auraiya, Azamgarh, Bahraich, Ballia, Balrampur, Banda, Bansi, Barabanki, Bareilly, Basti, Bijnor, Budaun, Bulandshahr, Dehradun, Deoria, Dhampur, Etah, Etawah, Faizabad, Fatehgarh, Fatehpur, Firozabad, Ghaziabad, Ghazipur, Gonda, Gopeshwar, Gorakhpur, Haldwani, Hamirpur,Hardoi, Jaunpur, Jhansi, Kanpur, Kheri, Lalitpur, Mainpuri, Mathura, Mau, Meerut, Mirzapur, Moradabad, Muzaffarnagar, Nainital, Orai, Pauri, Padrauna, Pilibhit, Pithoragarh, Pratapgarh, Rai Bareli, Rampur, Roorkee, Saharanpur, Shahajahanpur, Sitapur, Sultanpur, Tehri, Unnao, Varanasi.
West Bengal Circle : Kolkata (Calcutta) GPO, Alipore, Barabazar, Beleghata, Belghoria, Cassipore, Park Street, Tollygunge, Balurghat, Bankura, Barasat, Berhampore, Burdwan, Chinsurah, Cooch Behar, Darjeeling, Howrah, Jalpaiguri, Krishnagar, Malda, Midnapore, Purulia, Suri, Siliguri, Port Blair (Andaman & Nicobar Islands), Gangtok (Sikkim).
Field Post Offices through Central Base Post
Office (CBPO), 56 APO;
2 Central Base Post Office (CBPO) 99 APO.
Exam Details
Exam Details and Exam Centers
The examination is conducted according to the following plan
Part I  Written Examination carrying a maximum of 600 marks in the subject as shown below.
Part II  Personality Test carrying a maximum of 200 marks in respect of only those candidates who are declared qualified on the results of written examination.
1. The Subject of the Written Examination the time allowed and the maximum marks allotted to each subject are as follows:
Paper I  General Ability Test
(English, General knowledge and Psychological Test) 2 hours and 200 marks.
Paper II  Physical science (Physics and Chemistry) 2 hours and
200 marks.
Paper III  Mathematics 2 hours and 200 marks
2. The papers in all the Subjects will consist of objective type questions only. The question papers ( Test Booklets) are set in English only.
3.In the question papers, wherever necessary, questions involving the Metric System of Weights and Measures only will be set.
4. Question Papers is approximately of the Intermediate standard.
5.Candidates must write the paper s in their own hand .In no circumstances are they allowed the help of a scribe to write the answers for them
6.The commission have discretion to fix qualifying marks in any or all the subjects as the examination.
7. The candidates are not permitted to use calculators or mathematical or Logarithmic tables for answering objective type papers (test Booklets). they should not, therefore .bring the same inside examination hall.
Personality Test  Personality Test carrying a maximum of 200 marks in respect of only those candidates who are declared qualified on the results of written examination. Each candidate will be interviewed by a Board who will have before them a record of his career both academic and extramural. They will be asked questions on matters of general interest. Special attention will be paid to assessing their potential qualities of leadership, initiative and intellectual curiosity, tact and other social qualities , mental and physical energy, power of practical application and integrity of character.
Exam centers
Agartala, Gangtok, Panaji (goa), Ahmedabad, Hyderabad, Patna, Aizwal, Imphal, Port blair, Allahabad, Itanagar, Raipur, Bangalore, Jaipur, Ranchi, Bareilly, Jammu, Sambalpur, Bhopal, Jorhat, Shillong, Chandigarh, Kochi, Shimla, Chennai, Kohima , Srinagar, Cuttack, Kolkata, Thiruvanathapuram, Dehradun, Lucknow, Tirupati, Delhi, Madurai, Udaipur, Dharwar, Mumbai, Vishakhapatnam, Dispur, Nagpur
Terms and Conditions of apprenticeship for special Class Apprentices selected through the Examination
The terms and conditions of Apprenticeship are as set out in the form of agreement prescribed in the Indian railway Establishment manual, brief particulars of which are given below:

A candidate offered appointment as a Special Class Railway Apprentice has to execute an agreement in the prescribed form binding himself and one surety jointly and severally, to refund ,in the event of his failing to complete training as Special class Railway Apprentice or to accept the service as an officer on probation in the Indian Railway service of Mechanical Engineers, If offered to him to the satisfaction of the Government , any money paid to him and any other moneys expended by government on him, the government being the exclusive judge of the quantum of such expense.

The apprentices will be liable to undergo practical and theoretical training for 4 years in the first instance under an indenture binding them, to serve on the Indian railways on the completion of their training, if their services are required .The continuance of apprenticeship from year to year will depend on satisfactory reports being received from the authorities under whom the apprentices may be working. If at any time during his apprenticeship any apprentice does not satisfy the superior authorities that he is making good progress, he will be liable to be discharged from the apprenticeship. The government of India may at their discretion alter or modify the periods and courses of training.

The practical and theoretical training referred to above will be given in a railway workshop for four years of their Apprenticeship. Special Class apprentices must pass within this period either parts 1 and 2 of the council of Engineering Institutions Examination (London) or section 'A' and 'B' of the associate membership of Institution of Engineers India) Examinations. The apprentices are be granted a stipend of Rs.1300 per mensem during the 1st and 2nd years and Rs. 1400 per mensem during the 3rd and 4th years. During the apprenticeship, the candidates will be required to undergo both theoretical and practical training. There will be in all six Semester examinations passing each of which is compulsory. f unsuccessful at any of these examinations they will, depending on their performance, be asked to sit for a pass in supplementary examination or reverted to the next lower batch or removed from apprenticeship.

Note: Except as provided for in paragraph 4 below or in cases of discharge or dismissal due to insubordination, intemperance or other misconduct or breach of agreement a week's notice of discharge from apprenticeship will be given.

Before the completion of 4th year of training referred to in paragraph 2 above ,the apprentices will be listed in order of merit on the results of the examination held and the reports on the apprentices received during the period of apprenticeship. Successful apprentices are appointed on probation for 3 years in the Indian Railway Service of Mechanical Engineers.

Note: An apprentice will be considered to have obtained the qualifying standard if he obtains a minimum of 50% marks in the aggregate in all the examinations held during the six semester examination of his training. Including the marks of the reports of the principal, Indian railways Institute of Mechanical and Electrical Engineers, Jamalpur and of the deputy Chief Mechanical Engineer, provided that in each of the six semester exam. he has obtained a min. of 45 per cent marks in the aggregate and a min of 40 percent marks in any one subject.

Unsuccessful apprentices are discharged from their apprenticeship, one month's notice of discharge being given along with the intimation that the apprentice has been unsuccessful.

After Successful completion of 4 years apprenticeship ,the apprentices are appointed as probationers in the Indian Railway Service of mechanical Engineers, as per specified rules.
Syllabus
Paper I
English
The questions will be designed to test the candidates' understanding and command of the language.
General Knowledge
The questions will be designed to test a candidate’s general awareness of the environment around him and its application to society. The standard of answers to questions should be as expected of students of standard 12 or equivalent.
a) Man and his Environment  Evolution of life, plants and animals, heredity and environmentGenetics, cells, chromosomes, genes. Knowledge of the human bodynutrition, balanced diet, substitute foods, public health and sanitation including control of epidemics and common diseases. Environmental pollution and its control. Food adulteration, proper storage and preservation of food grains and finished products, population explosion, population control. Production of food and raw materials. Breeding of animals and plants, artificial insemination, manures and fertilizers, crop protection measures, high yielding varieties and green revolution, main cereal and cash crops of India.
b) Solar system and the earth, Seasons, Climate, Weather, Soilits formation, erosion Forests and their uses. Natural calamities cyclones, floods, earthquakes, volcanic eruptions. Mountains and rivers and their role in irrigation in India. Distribution of natural resources and industries in India. Exploration of underground minerals including Oil Conservation of natural resources with particular reference to the flora and fauna of India.
c) History, Politics and Society in India  Vedic, Mahavir, Budhdha, Mauryan, Sunga, Andhra, Kushan. Gupta ages (Mauryan Pillars, Stupa Caves, Sanchi, Mathura and Gandharva Schools, Temple architecture, Ajanta and Ellora). The rise of new social forces with the coming of Islam and establishment of broader contacts. Transition from feudalism to capitalism. Opening of European contacts. Establishment of British rule in India. Rise of nationalism and national struggle for freedom culminating in Independence.
d) Constitution of India and its characteristic features  Democracy, Secularism, Socialism, equality of opportunity and Parliamentary form of Government. Major political ideologiesdemocracy, socialism, communism and Gandhian idea of nonviolence. Indian political parties, pressure groups, public opinion and the press, electoral system.
e) India’s foreign policy and nonalignmentArms race, balance of power. World organisationpolitical, social, economic and cultural. Important events (including sports and cultural activities) in India and abroad during the past two years.
f) Broad features of Indian social system : The caste system, hierarchy  recent changes and trends. Minority social institution  marriage, family, religion and acculturation.
g) Division of labour, cooperation, conflict and competition, Social control  reward and punishment, art, law, customs, propaganda, public opinion, agencies of social control  family, religion, state educational institutions; factors of social change economic, technological, demographic, cultural; the concept of revolution.
h) Social disorganization in India  Casteism, communalism, corruption in public life, youth unrest, beggary, drugs, delinquency and crime, poverty and unemployment.Social planning and welfare in India, community development and labour welfare; welfare of Scheduled Castes and backward classes.
i) Money  Taxation, price, demographic trends, national income, economic growth. Private and Public Sectors; economic and noneconomic factors in planning, balanced versus imbalanced growth, agricultural versus industrial development; inflation and price stabilization, problem of resource mobilization. India’s Five Year Plans.
Psychological Test
The questions will be designed to assess the basic intelligence and mechanical aptitude of the candidate.
PaperII
Physics
Length measurements using vernier, screw gauge, spherometer and optical lever. Measurement of time and mass.Straight line motion and relationships among displacement, velocity and acceleration, .Newton's laws of motion, Momentum, impulse, work, energy and power.Coefficient of friction.Equilibrium of bodies under action of forces. Moment of a force, couple. Newton’s law of gravitation. Escape velocity. Acceleration due to gravity.Mass and Weight; Centre of gravity, Uniform circular motion, centripetal force, simple Harmonic motion. Simple pendulum.Pressure in a fluid and its variation with depth. Pascal’s law. Principle of Archimedes. Floating bodies, Atmospheric pressure and its measurement.Temperature and its measurement. Thermal expansion, Gas laws and absolute temperature. Specific heat, latent heats and their measurement. Specific heat of gases. Mechanical equivalent of heat. Internal energy and First law of thermodynamics, Isothermal and adiabatic changes. Transmission of heat; thermal conductivity.Wave motion; Longitudinal and transverse waves. Progressive and stationary waves, Velocity of sound in gas and its dependence on various factors. Resonance phenomena (air columns and strings).
Reflection and refraction of light. Image formation by curved mirrors and lenses, Microscopes and telescopes. Defects of vision.Prisms, deviation and dispersion, Minimum deviation. Visible spectrum.Field due to a bar magnet, Magnetic moment, Elements of Earth’s magnetic field. Magnetometers. Dia, para and ferromagnetism.Electric charge, electric field and potential, Coulomb’s law.Electric current; electric cells, e.m.f. resistance, ammeters and voltmeters. Ohm’s law; resistances in series and parallel, specific resistance and conductivity. Heating effect of current.Wheatstone’s bridge, Potentiometer.Magnetic effect of current; straight wire, coil and solenoid electromagnet; electric bell.Force on a currentcarrying conductor in magnetic field; moving coil galvanometers; conversion to ammeter or voltmeter.Chemical effects of current; Primary and storage cells and their functioning, Laws of electrolysis.Electromagnetic induction; Simple A.C. and D.C. generators. Transformers, Induction coil,Cathode rays, discovery of the electron, Bohr model of the atom. Diode and its use as a rectifier.Production, properties and uses of Xrays.Radioactivity; Alpha, Beta and Gamma rays.Nuclear energy; fission and fusion, conversion of mass into energy, chain reaction.
Chemistry
Physical Chemistry

Atomic structure; Earlier models in brief. Atom as at three dimensional model. Orbital concept. Quantum numbers and their significance, only elementary treatment.Pauli’s Exclusion Principle. Electronic configuration. Aufbau Principle, s.p.d. and f. block elements.Periodic classification only long form. Periodicity and electronic configuration. Atomic radii, Electronegativity in period and groups.

Chemical Bonding, electrovalent, covalent, coordinate covalent bonds. Bond Properties, sigma and Pie bonds, Shapes of simple molecules like water, hydrogen sulphide, methane and ammonium chloride. Molecular association and hydrogen bonding.

Energy changes in a chemical reaction. Exothermic and Endothermic Reactions. Application of First Law of Thermodynamics, Hess’s Law of constant heat summation.

Chemical Equilibria and rates of reactions. Law of Mass action. Effect of Pressure, Temperature and concentration on the rates of reaction. (Qualitative treatment based on Le Chatelier’s Principle). Molecularity; First and Second order reaction. Concept of Energy of activation. Application to manufacture of Ammonia and Sulphur trioxide.

Solutions : True solutions, colloidal solutions and suspensions. Colligative properties of dillute solutions and determination of Molecular weights of dissolved substances. Elevation of boiling points. Depressions of freezing point, osmotic pressure. Raoult’s law (nonthermodynamic treatment only).

ElectroChemistry : Solution of Electrolytes, Faraday’s Laws of Electrolysis, ionic equilibria, Solubility product.Strong and weak electrolytes. Acids and Bases (Lewis and Bronstead concept). pH and Buffer solutions.

Oxidation  Reduction; Modern, electronics concept and oxidation number.

Natural and Artificial Radioactivity: Nuclear Fission and Fusion. Uses of Radioactive isotopes.
Inorganic Chemistry
Brief Treatment of Elements and their industrially important compounds :

Hydrogen : Position in the periodic table. Isotopes of hydrogen. Electronegative and electropositive character. Water, hard and soft water, use of water in industries, Heavy water and its uses.

Group I Elements : Manufacture of sodium hydroxide, sodium carbonate, sodium bicarbonate and sodium chloride.

Group II Elements : Quick and slaked lime. Gypsum, Plaster of Paris. Magnesium sulphate and Magnesia.

Group III Elements: Borax, Alumina and Alum.

Group IV Elements : Coals, Coke and solid Fuels, Silicates, Zolitis semiconductors. Glass (Elementary treatment).

Group V Elements. Manufacture of ammonia and nitric acid. Rock Phosphates and safety matches.

Group VI Elements. Hydrogen peroxide, allotropy of sulphur, sulphuric acid. Oxides of sulphur.

Group VII Elements. Manufacture and uses of Fluorine, Chlorine, Bromine and Iodine, Hydrochloric acid. Bleaching powder.

Group O. (Noble gases) Helium and its uses.

Metallurgical Processes : General Methods of extraction of metals with specific reference to copper, iron, aluminium, silver, gold, zinc and lead. Common alloys of these metals; Nickel and manganese steels.
Organic Chemistry

Tetrahedral nature of carbon, Hybridisation and sigma pie bonds and their relative strength. Single and multiple bonds. Shapes of molecules. Geometrical and optical isomerism.

General methods of preparation, properties and reaction of alkanes, alkenes and alkynes, Petroleum and its refining. Its uses as fuel.Aromatic hydrocarbons : Resonance and aromaticity. Benzene and Naphthalene and their analogues. Aromatic substitution reactions.

Halogen derivatives : Chloroform, Carbon Tetrachloride, Chlorobenzene, D.D.T. and Gammexane.

Hydroxy Compounds : Preparation, properties and uses of Primary, Secondary and Tertiary alcohols, Methanol, Ethanol, Glycerol and Phenol, Substitution reaction at aliphatic carbon atom.

Ethers; Diethyl ether.

Aldehydes and ketones : Formaldehyde, Acetaldehyde, Benzaldehyde, acetone, acetophenone.

Nitro compounds amines: Nitrobenzene TNT, Anlline, Diazonium Compounds, Azodyes.

Carboxylic acid : Formic, acetic, denezoic and salicylic acids, acetyl salicylic acid.

Esters : Ethylacerate, Methyl salicylates, ethylbenzoate.

Polymers : Polythene, Teflon, Perpex, Artificial Rubber, Nylon and polyester fibers.

Nonstructural treatment of Carbohydrates, Fats and Lipids, amino acids and proteins  Vitamins and hormones.
PaperIII
Mathematics
1. Algebra :
Concept of a set, Union and Intersection of sets, Complement of a set, Null set, Universal set and Power set, Venn diagrams and simple applications. Cartesian product of two sets, relation and mapping  examples, Binary operation on a set  examples.
Representation of real numbers on a line. Complex numbers: Modulus, Argument, Algebraic operations on complex numbers. Cube roots of unity. Binary system of numbers, Conversion of a decimal number to a binary number and viceversa. Arithmetic, Geometric and Harmonic progressions. Summation of series involving A.P., G.P., and H.P.. Quadratic equations with real coefficients. Quadratic expressions: extreme values. Permutation and Combination, Binomial theorem and its applications.
Matrices and Determinants: Types of matrices, equality, matrix addition and scalar multiplication  properties. Matrix multiplication  noncommutative and distributive property over addition. Transpose of a matrix, Determinant of a matrix. Minors and Cofactors. Properties of determinants. Singular and nonsingular matrices. Adjoint and Inverse of a squarematrix, Solution of a system of linear equations in two and three variableselimination method, Cramers rule and Matrix inversion method (Matrices with m rows and n columns where m, n less than equal to 3 are to be considered).Idea of a Group, Order of a Group, Abelian group. Identitiy and inverse elementsIllustration by simple examples.
2. Trigonometry
Addition and subtraction formulae, multiple and submultiple angles. Products and factoring formulae. Inverse trigonometric functions  Domains, Ranges and Graphs. DeMoivre's theorem, expansion of Sin n0 and Cos n0 in a series of multiples of Sines and Cosines. Solution of simple trigonometric equations. Applications: Heights and Distance.
3. Analytic Geometry (two dimensions)
Rectangular Cartesian. Coordinate system, distance between two points, equation of a straight line in various forms, angle between two lines, distance of a point from a line. Transformation of axes. Pair of straight lines, general equation of second degree in x and y  condition to represent a pair of straight lines, point of intersection, angle between two lines. Equation of a circle in standard and in general form, equations of tangent and normal at a point, orthogonality of two cricles. Standard equations of parabola, ellipse and hyperbola  parametric equations, equations of tangent and normal at a point in both cartesian and parametric forms.
4. Differential Calculus
Concept of a real valued function  domain, range and graph. Composite functions, one to one, onto and inverse functions, algebra of real functions, examples of polynomial, rational, trigonometric, exponential and logarithmic functions. Notion of limit, Standard limits  examples. Continuity of functions  examples, algebraic operations on continuous functions. Derivative of a function at a point, geometrical and physical interpretation of a derivative  applications. Derivative of sum, product and quotient of functions, derivative of a function with respect to another function, derivative of a composite function, chain rule. Second order derivatives. Rolle's theorem (statement only), increasing and decreasing functions. Application of derivatives in problems of maxima, minima, greatest and least values of a function.
5. Integral Calculus and Differential equations :
Integral Calculus : Integration as inverse of differentiation, integration by substitution and by parts, standard integrals involving algebraic expression, trigonometric, exponential and hyperbolic functions. Evaluation of definite integralsdetermination of areas of plane regions bounded by curves  applications.
Differential equations : Definition of order and degree of a differential equation, formation of a differential equation by examples. General and particular solution of a differential equation, solution of first order and first degree differential equation of various types  examples. Solution of second order homogeneous differential equation with constant coefficients.
6. Vectors and its applications :
Magnitude and direction of a vector, equal vectors, unit vector, zero vector, vectors in two and three dimensions, position vector. Multiplication of a vector by a scalar, sum and difference of two vectors, Parallelogram law and triangle law of addition. Multiplication of vectors  scalar product or dot product of two vectors, perpendicularity, commutative and distributive properties. Vector product or cross product of two vectors  its properties, unit vector perpendicular to two given vectors. Scalar and vector triple products. Equations of a line, plane and sphere in vector form  simple problems. Area of a triangle, parallelogram and problems of plane geometry and trigonometry using vector methods. Work done by a force and moment of a force.
7. Statistics and probability :
Statistics : Frequency distribution, cumulative frequency distribution  examples. Graphical representation  Histogram, frequency polygon  examples. Measure of central tendency  mean, median and mode. Variance and standard deviation  determination and comparison. Correlation and regression.
Probability : Random experiment, outcomes and associated sample space, events, mutually exclusive and exhaustive events, impossible and certain events. Union and Intersection of events. Complementary, elementary and composite events. Definition of probability : classical and statistical  examples. Elementary theorems on probability  simple problems. Conditional probability, Bayes' theorem  simple problems. Random variable as function on a sample space. Binomial distribution, examples of random experiments giving rise to Binomial distribution.
Online Coaching for IAS PRE. Last Date: 01 May 2014 [ REGISTER for free Trial ]  Online Test Series